English
Français
Deutsch
Italiano
Русский
Español
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
Solução de problemas de superaquecimento da bomba hidráulica e perda de fluxo em escavadeiras Komatsu PC1250
A technical guide on diagnosing low hydraulic pressure, oil overheating, and swashplate response delay in Komatsu PC1250-7 and PC1100-6 main hydraulic pumps.
Bomba Hidráulica Principal Komatsu PC1100 e PC1250 (Série 708-2H / 708-2L): Seleção, Cruzamento e Análise de Falhas
Engineering guide covering application scenarios, part cross-referencing (708-2H-00322, 708-2L-00522), and root-cause failure analysis for Komatsu PC1100-6 and PC1250-7 main hydraulic pumps.
Por que uma bomba hidráulica se desgasta rapidamente após a substituição?
Replacement excavator hydraulic pumps often fail prematurely because contamination, incorrect installation, poor oil/filter condition, system pressure or heat issues, and other hydraulic component problems remain unresolved. Proper cleaning, inspection, installation, and commissioning are essential to prevent repeated pump failures.
Bomba hidráulica da escavadeira versus válvula de controle principal: como identificar o problema real?
This blog explains how to distinguish between excavator hydraulic pump and main control valve problems by comparing symptoms, such as whether all functions or only specific circuits are affected. It also outlines a systematic diagnostic procedure involving oil checks, filters, pressure testing, function comparison, and valve inspection.
BOMBAS HIDRÁULICAS REXROTH (UCHIDA) SÉRIE AP2D PARA ESCAVADEIRAS
This guide covers the Rexroth (Uchida) AP2D series of tandem variable-displacement hydraulic pumps for 1.2–8 tonne mini and compact excavators, including AP2D12 through AP2D36 models rated at 350 bar and 3500 rpm. It provides OEM application references, cross-reference codes, and buyer guidance for sourcing exact pumps, control variants, and spare parts.
O que causa ruído em uma bomba hidráulica de escavadeira?
This blog explains common causes of noise in an excavator hydraulic pump, including air ingestion, cavitation, low or contaminated oil, worn bearings, blocked filters, and incorrect oil selection. It also outlines symptoms and preventive maintenance steps to reduce downtime and extend pump life.
